When is it necessary to expand the monitoring system?
- if you reach the maximum number of accounts that allows receiving messages safely (we do not have to decrease the number of test messages)
- if we would like to add new channels to our existing system
- if our old receivers are outdated and cannot serve the requirements
- to operate a safe system, it is necessary to have backup receivers in case the major receiver goes wrong or become unavailalble
Download the IP products leaflet >>
Simple and cost effective transmission: IPCOM
The IPCOM IP communicator is a perfect solution for monitoring transmission where wired Internet is available. By means of the device immediate alarm transmission is guaranteed without any additional operation cost. The IPCOM IP communicator can be connected to the telephone line connector of the alarm control panel (or to the serial port of some specified alarm control panel). Additionally it can send the status of two inputs. After the automatic network setting configuration (DHCP) and monitoring station data entering the events are ready to be sent to two different monitoring stations.
Advantageous of IPCOM
- SIM card is not necessary - there is no maintenance cost
- SIA DC09 IP protocol - compatible with the vast majority of receivers
- The object identifier can be changed
- Serial/IP converter function - ideal solution for automation systems where the product can be fit with RS232 interface
- Programming via USB/IP
- DHCP function- automatic configuration of network settings
- Expansion possiblity with the IO84 module - 16 inputs and 8 outputs
IPCOM communicator description
- Immediate two-way transmission (Contact ID)
- Automatic configuration of network settings (DHCP)
- Report to two independent servers (parallel / backup)
- Remote programming (through IP network)
- Event receiving through telephone line
- Event receiving through serial port
- Configurable test sending parameters
- Buffer memory with 64 events
- Encrypted communication (AES-128)
- Local configuration through USB with VUP cable (optional)
- Two inputs with configurable event codes
- 8 / 16 inputs extension with IP-IO8 module (optional)
- Firmware update function
- CE declaration, ISO 9001:2009 certificate
- Operation as Contact – IP, Serial – IP converter
- Made in EU, excellent product support
Power supply | 10.5 – 15.0 V DC |
Maximal current consumption | 160 mA |
Event buffer | Yes |
Serial event receiving | Yes |
Input / Output | 2 |
Ethernet connection | 10 Base-T |
Event buffer | up to 64 events |
Operating temperature | 0 °C / +50 °C |
Sizes (W / L / H) | 48 x 42 x 15 mm |
Weight | 40 g |
Would you like to test the IPCOM with your existing monitoring system? let us know and our colleague will contact you .