Signaling via voice call – simple and reliable communication
Voice call signalling is a traditional yet reliable solution that transmits alarm signals through a phone call. In this case, the alarm system initiates a call to a pre-set phone number and conveys the alarm type and location via a Contact ID or voice message. This signalling method is particularly useful when a data connection is unavailable, providing simple and reliable communication between the user and the monitoring centre.
IPCOM Cloud - IP communicator with 2IO Cloud compatible
IP transmitter
The IPCOM Could IP communicator is a perfect solution for monitoring transmission where wired Internet is available. By means of the device immediate alarm transmission is guaranteed without any additional operation cost. The IPCOM Cloud IP communicator can be connected to the telephone line connector of the alarm control panel (or to the serial port of some specified alarm control panel). Additionally it can send the status of two inputs. After the automatic network setting configuration (DHCP) and monitoring station data entering the events are ready to be sent to two different monitoring stations.
COM G Cloud - GSM/GPRS communicator with 2IO Cloud compatible
GPRS/GSM communicator
The COM G Cloud GPRS/GSM communicator is recommended for high-security applications where a backup transmission line is essential. The main reporting channel is GPRS, which provides immediate alarm transmission and action. The secondary reporting channel is GSM. A secondary GSM channel can be used in a backup way, in a parallel way (GSM and GPRS transmission at the same time), and as the main transmission channel. COM G Cloud GPRS/GSM communicator means a high-security solution.
EasyLine GSM - 48/72 V line simulator with 1 input and 1 output
Miniature phone (PSTN) simulator (6 x 4 cm)
EasyLine GSM provides a full (48V) line to the control panel via the TIP / RING connection, through which the control panel can signal the monitoring station to the receiver via a voice call or even send the control panel voice message to the end-user. Thanks to the OC output, we can control the output with the phone numbers saved on the SIM card, with which we can arm or even disarm the control panel. Suitable for replacing a landline telephone line, also at a call center or elevator call.
- TIP/RING connection to PSTN line simulation
- 1 SMS contact input
- 1 OC output
- SMS forwarding
- Contact ID, 4/2 protocol
- Programming by SMS or phone (DTMF)
- Output control by saved numbers on the SIM card
ProCon GSM Cloud - GSM transceiver and remote control with 5 inputs and 1 relay output
- 5 contact driven input
- 1 NO/ NC relay output which can be controlled either by SMS from unlimited phone numbers or by voice call from 1000 phone numbers
- 8 notified phone numbers can be set
- SMS, voice message, Contact ID sending
- Expansion possibility ( GSM alarm center)
- GPRS transmission to the monitoring station, by Enigma and SIA IP protocol
- Programming by SMS, PC, Cloud and the voice menu
IPCOM G Cloud - IP and GSM communicator with 2IO Cloud compatible
IP/GPRS/GSM communicator
The IPCOM G Cloud GPRS transmitter is recommended for high-security applications where a backup transmission line is essential. The main reporting channel is the wired Internet, which provides immediate alarm transmission and action without additional operating costs. The secondary reporting channel is GPRS. Secondary GPRS channel can be used in a backup way (if the Ethernet network fails), in a parallel way (Ethernet and GPRS transmission at the same time), and as the main transmission channel (if there is no Ethernet network at the installation site). IPCOM G Cloud GPRS transmitter means high security solution.
EasyLine 4G - 48/72 V 4G line simulator with 1 input and 1 output
Miniature phone (PSTN) simulator (6 x 4 cm)
EasyLine GSM provides a complete (48V) line to the control panel via the TIP / RING connection, through which the control panel can signal the monitoring station to the receiver via a voice call or even send the control panel voice message to the end-user. Furthermore, thanks to the OC output, we can control the output with the phone numbers saved on the SIM card, with which we can arm or even disarm the control panel. Suitable for replacing a landline telephone line, also at a call centre or elevator call.
- TIP/RING connection for PSTN line simulation
- Transmission of Contact ID, 4/2 protocol from the alarm centre
- Two-way voice communication
- 1 NO/NC contact input
- SMS, voice message transmission to 8 phone numbers in case of an input signal
- 1 OC output, bistable, monostable control
- Output control with 1000 phone numbers
- PC programming with the firmware update
ProLine 4G - 4G line simulator with 2 inputs and 1 output, communicator with remote controlling
Analog telephone line simulator (PSTN) with output control
- Analog telephone line (PSTN) simulator with 48V line and 72V ringing voltage
- Reception of Contact ID codes through line input
- Transmission of Contact ID codes to remote monitoring using SIA DC-09 and Enigma protocols (GPRS/LTE)
- Conversion of Contact ID to SMS, pairing of 250 events and 250 zones
- Specification of 8 phone numbers for notifications via SMS and voice messages
- Specification of 2 phone numbers and 4 IP addresses for monitoring station notification
- 2 NO/NC contact controlled inputs
- 1 relay output, which can be controlled freely from up to 1000 phone numbers
- Output can be monostable or bistable controlled
- Battery connector for ProBattery battery
- Expansion option: 1 relay and 3 relay output expanders
- Programming via SMS, PC, WIFI, Android app
ProCon 4G Cloud - 5-input, 1-relay output 4G transmitter and remote control
- 5 contact-driven input
- 1 NO/ NC relay output which can be controlled either by SMS from unlimited phone numbers or by voice call from 1000 phone numbers
- 8 notified phone numbers can be set
- SMS, voice message, Contact ID sending
- Expansion possibility
- GPRS transmission to the monitoring station by Enigma and SIA IP protocol
- Programming by SMS, PC and android application via Bluetooth and Internet
COM 4G Cloud - GSM/GPRS/4G communicator with 2IO Cloud compatible
GPRS/GSM/4G communicator
The COM 4G Cloud GPRS/GSM/4G communicator is recommended for high-security applications where a backup transmission line is essential. The main reporting channel is GPRS, which provides immediate alarm transmission and action. The secondary reporting channel is GSM/4G. A secondary GSM/4G channel can be used in a backup way, in a parallel way (GSM/4G and GPRS transmission at the same time), and as the main transmission channel. COM G Cloud GPRS/GSM/4G communicator means a high-security solution.
IPCOM 4G Cloud - IP and 4G communicator with 2IO Cloud compatible
IP 2G/3G/4G Communicator
The IPCOM 4G Cloud module is recommended for high-security applications where the backup transmission line is essential. The main reporting channel is the wired Internet, which provides immediate alarm transmission and action without additional operating costs. The secondary reporting channel is GPRS/HSPA/LTE. Secondary GPRS/HSPA/LTE channel can be used in a backup way (if the Ethernet network fails), in a parallel way (Ethernet and GPRS/HSPA/LTE transmission at the same time), and as the main transmission channel (if there is no Ethernet network at installation site). IPCOM 4G Cloud module means a high-security solution.
ProLine 4G LAN - 4G line simulator with LAN connection, 2 inputs and 1 output, communicator with remote controlling
Analog telephone line simulator (PSTN) with output control
- Analog telephone line (PSTN) simulator with 48V line and 72V ringing voltage
- Reception of Contact ID codes through line input
- Transmission of Contact ID codes to remote monitoring using SIA DC-09 and Enigma protocols (GPRS/LTE)
- Conversion of Contact ID to SMS, pairing of 250 events and 250 zones
- Specification of 8 phone numbers for notifications via SMS and voice messages
- Specification of 2 phone numbers and 4 IP addresses for monitoring station notification
- 2 NO/NC contact controlled inputs
- 1 relay output, which can be controlled freely from up to 1000 phone numbers
- Output can be monostable or bistable controlled
- Battery connector for ProBattery battery
- Expansion option: 1 relay output expanders
- Programming via SMS, PC, WIFI, Android app
